| |
Silvent 007-P with its
PEEK nozzle prevents unnecessary scratching. The Peek nozzle has
been specially developed for sensitive applications where expensive
tools and machines absolutely may not be damaged. The nozzle is
fitted on a flexible PA 12 pipe that provides additional protection
against scratches caused by mechanical impact. Peek is a unique
plastic material with properties that meet the rigor-ous quality and
safety requirements of, for example, the aerospace industry. It is
extremely impact resistant and is capable of handling aggressive
chemical environments, strong cutting fluids and temper-atures of up
to 260° C (500° F). The nozzle is designed with a central hole that
generates a concentrated air stream. At the same time, the sound
level is low and air consumption is reduced. The PEEK guns are
available with three different extension pipe lengths. Patented. |
|
| Replaces open pipe: |
ø4mm |
(5/32") |
|
| Air consumption: |
14Nm³/h |
(8.2scfm) |
|
| Sound level: |
79dB(A) |
|
| Blowing force: |
2.4N |
(8.4oz) |
|
| Max temp.: |
70ºC |
(158ºF) |
|
| Weight: |
165g |
(0.36lbs) |
|
| Connection: |
1/4" BSP |
(1/4"-18 NPT) |
female |
| Nozzle material: |
Peek |
|
| |
| Fully meets the EU Machine
Directive's noise limitation requirements and OSHA's safety
regulations. |
| |
Supply pressure: 500 kPa ( 72 psi ),
measured just before the nozzle
Sound level is measured at
a distance of i m ( 39.37") from the nozzle,
with the
microphone held perpendicular to the direction of the air
stream |
| |
| Similar products:
007-MJ4,
007-MJ5,
007-MJ6,
007-S,
007-L,
007-Z
|
 |
View technical data-sheet in
pdf-format. | |
| | |
Safety air guns
