| |
Silvent 2973 is an
excellent gun for applications where you need to move away large
particles or chips quickly and efficiently. The design of the nozzle
makes the air cone dig in and sweep the work surface clean. The gun
is fitted with a powerful flat stainless steel nozzle that can cope
with most applications. The blowing force is approximately three
times that of an ordinary air gun. Despite its power, the sound
level and energy consumption are low in relation to the work the gun
performs. Patented. |
|
| Replaces open pipe: |
ø7mm |
(9/32") |
|
| Air consumption: |
58Nm³/h |
(34.2scfm) |
|
| Sound level: |
86dB(A) |
|
| Blowing force: |
9.5N |
(33.5oz) |
|
| Max temp.: |
70ºC |
(158ºF) |
|
| Weight: |
350g |
(0.77lbs) |
|
| Connection: |
3/8" BSP |
(3/8"-18 NPT) |
female |
| Nozzle material: |
Stainless steel |
|
| |
| Fully meets the EU Machine
Directive's noise limitation requirements and OSHA's safety
regulations. |
| |
Supply pressure: 500 kPa ( 72 psi ),
measured just before the nozzle
Sound level is measured at
a distance of i m ( 39.37") from the nozzle,
with the
microphone held perpendicular to the direction of the air
stream |
| |
|
 |
View technical data-sheet in
pdf-format. | |
| | |
Safety air guns
