| |
Silvent safety gun 500-M has a micronozzle. By combining the 500 grip and a stainless steel
micronozzle you can save substantial amounts of compressed air in
many applications. In most cases more blowing force and energy are
used than necessary. The blowing force generated by a micronozzle is
often more than adequate, even for general purpose blowing. A
central hole in combination with surrounding slots makes the nozzle
extremely efficient and quiet. Compared with conventional air guns
without a nozzle, a Silvent micronozzle permits you to reduce
compressed air consumption by up to 75% and at the same time keep
the noise level under 76 dB(A). Patented. |
|
| Replaces open pipe: |
ø2mm |
(5/64") |
|
| Air consumption: |
4Nm³/h |
(2.4scfm) |
|
| Sound level: |
76dB(A) |
|
| Blowing force: |
0.9N |
(3.2oz) |
|
| Max temp.: |
70ºC |
(158ºF) |
|
| Weight: |
145g |
(0.32lbs) |
|
| Connection: |
1/4" BSP |
(1/4"-18 NPT) |
female |
| Nozzle material: |
Stainless steel |
|
| |
| Fully meets the EU Machine
Directive's noise limitation requirements and OSHA's safety
regulations. |
| |
Supply pressure: 500 kPa ( 72 psi ),
measured just before the nozzle
Sound level is measured at
a distance of i m ( 39.37") from the nozzle,
with the
microphone held perpendicular to the direction of the air
stream |
| |
| Similar products:
500-MJ5
500-MJ6,
007-MJ4,
007-MJ5,
007-MJ6
|
 |
View technical data-sheet in
pdf-format. | |
| | |
Safety air guns
