| |
Silvent’s back-blow nozzle
is used for blowing clean inside pipes or channels. Cleaning out
pipe during and after tooling has always been a problem. Blowing
clean using conventional methods is impossible as chips are blown
further into the pipe rather than out. The back-blow nozzle
can handle blow-out of pipe diameters of up to 400 mm (16”). The
nozzles are based upon and manufactured in accordance with Silvent’s
patents, which means that both noise level and air consumption are
kept to a minimum. They fully meet OSHA safety standards |
|
| Replaces open pipe: |
ømm |
() |
|
| Air consumption: |
91Nm³/h |
(53.6scfm) |
|
| Sound level: |
90dB(A) |
|
| Blowing force: |
13.2N |
(46.6oz) |
|
| Max temp.: |
250ºC |
(482ºF) |
|
| Weight: |
215g |
(0.47lbs) |
|
| Connection: |
1" BSP |
(1"-11 1/2 NPT) |
female |
| Nozzle material: |
Steel |
|
| |
| Fully meets the EU Machine
Directive's noise limitation requirements and OSHA's safety
regulations. |
| |
Supply pressure: 500 kPa ( 72 psi ),
measured just before the nozzle
Sound level is measured at
a distance of i m ( 39.37") from the nozzle,
with the
microphone held perpendicular to the direction of the air
stream |
| |
| Similar products:
910
|
 |
View technical data-sheet in
pdf-format. | |
| | |
Air nozzles
