| |
Silvent 208 and 209 are
nozzles that are used in most types of applications. The 208 has
female thread and the 209 has male thread. These nozzles are among
Silvent's most popular nozzles and are today installed in thousands
of different applications - applications where the noise level has
been cut in half and energy consumption drastically reduced. The
protective flanges prevent direct contact between skin and the
exhaust ports. With this design, the nozzle fulfills the OSHA
requirements of a dead-end static pressure of 210 kPa (30 psi).
Patented. |
|
| Replaces open pipe: |
ø4mm |
(5/32") |
|
| Air consumption: |
19Nm³/h |
(11.2scfm) |
|
| Sound level: |
80dB(A) |
|
| Blowing force: |
3.5N |
(12.4oz) |
|
| Max temp.: |
70ºC |
(158ºF) |
|
| Weight: |
40g |
(0.088lbs) |
|
| Connection: |
1/4" BSP |
(1/4"-18 NPT) |
female |
| Nozzle material: |
Zinc |
|
| |
| Fully meets the EU Machine
Directive's noise limitation requirements and OSHA's safety
regulations. |
| |
Supply pressure: 500 kPa ( 72 psi ),
measured just before the nozzle
Sound level is measured at
a distance of i m ( 39.37") from the nozzle,
with the
microphone held perpendicular to the direction of the air
stream |
| |
| Similar products:
209 |
 |
View technical data-sheet in
pdf-format. | |
| |
|
| |
Hole nozzles
