| |
Silvent 456 is a doughnut
nozzle for effective drying or cleaning of cables, sections, hoses,
etc. Its design allows the material to be continuously fed through
the nozzle. Blow-off is accomplished by 6 concentrated air jets that
strike the material from all sides as it passes. The nozzle is
suitable for cables and sections of from Ø 5 to 25 mm ( 3/16"-1").
Patented. |
|
| Replaces open pipe: |
ø10mm |
(3/8") |
|
| Air consumption: |
114Nm³/h |
(67.2scfm) |
|
| Sound level: |
90dB(A) |
|
| Blowing force: |
20N |
(70.5oz) |
|
| Max temp.: |
70ºC |
(158ºF) |
|
| Weight: |
260g |
(0.57lbs) |
|
| Connection: |
3/8" BSP |
(3/8"-18 NPT) |
male |
| Nozzle material: |
Zinc |
|
| |
| Fully meets the EU Machine
Directive's noise limitation requirements and OSHA's safety
regulations. |
| |
Supply pressure: 500 kPa ( 72 psi ),
measured just before the nozzle
Sound level is measured at
a distance of i m ( 39.37") from the nozzle,
with the
microphone held perpendicular to the direction of the air
stream |
| |
| Similar products:
462
|
 |
View technical data-sheet in
pdf-format. | |
| | |
Doughnut nozzle
