| |
SILVENT 715 L is a stainless steel Laval nozzle. Compressed air is
utilized optimally in this nozzle and its introduction constitutes a
new dimension in blowing technology. The effect is achieved by
surrounding a core of air traveling at supersonic speed with a
protective film of air moving parallel to the central air jet. The
central stream of air in the Silvent 715 L is generated by a Laval
nozzle. The design of the nozzle converts all of the energy stored in
the compressed air into kinetic energy without the air jet expanding
laterally after it has passed through the nozzle. The protective
sheath of air around the core stream prevents it from being slowed
down by the surrounding air and allows it to be utilized at full
effect. This hinders the creation of turbulence and thereby lowers the
sound level. The nozzle is made of stainless steel, which makes it
suitable for use in virtually any environment where extra high blowing
forces are required, e.g. within the paper and manufacturing
industries, steel mills and chemical plants. Patented. |
|
| Replaces open
pipe: |
ø18mm |
(23/32") |
|
| Air consumption: |
312Nm³/h |
(183.8scfm) |
|
| Sound level: |
104dB(A) |
|
| Blowing force: |
54.0N |
(190.6oz) |
|
| Max temp.: |
400ºC |
(752ºF) |
|
| Weight: |
225.0g |
(0.5lbs) |
|
| Connection: |
3/4" BSP |
(3/4"-14 NPT) |
male |
| Nozzle material: |
Stainless steel |
|
| |
| |
| |
Supply pressure: 500 kPa ( 72 psi ),
measured just before the nozzle
Sound level is measured at
a distance of i m ( 39.37") from the nozzle,
with the
microphone held perpendicular to the direction of the air
stream |
| |
| Similar products:
|
 |
View technical data-sheet in
pdf-format. | |
| | |
Air nozzles
