| |
Silvent 971 is a flat
nozzle made entirely of stainless steel. It fulfills virtually every
demand industry places upon a modern air nozzle. Two variations are
available – with or without flow regulation. Built-in flow
regulation allows optimal utilization of compressed air. Adjusting
the blowing force minimizes both energy consumption and the noise
level. The design of the nozzle creates an air stream with a broader
striking surface – clearly an advantage when wide objects must be
dried, sorted or cleaned. The 971 is capable of withstanding high
ambient temperatures and corrosive chemical environments as well as
satisfying the hygienic requirements of the food processing
industry. Fully meets OSHA safety regulations. Patented. |
|
| Replaces open pipe: |
ø4mm |
(5/32") |
|
| Air consumption: |
21Nm³/h |
(12.4scfm) |
|
| Sound level: |
81dB(A) |
|
| Blowing force: |
3.8N |
(13.4oz) |
|
| Max temp.: |
400ºC |
(752ºF) |
|
| Weight: |
50g |
(0.110lbs) |
|
| Connection: |
1/8" BSP |
(1/8"-27 NPT) |
male |
| Nozzle material: |
Stainless steel |
|
| |
| Fully meets the EU Machine
Directive's noise limitation requirements and OSHA's safety
regulations. |
| |
Supply pressure: 500 kPa ( 72 psi ),
measured just before the nozzle
Sound level is measured at
a distance of i m ( 39.37") from the nozzle,
with the
microphone held perpendicular to the direction of the air
stream |
| |
| Similar products:
973
|
 |
View technical data-sheet in
pdf-format. | |
| | |
Stainless Steel Flat Nozzle
