| |
Silvents Microseries of
compressed air nozzles is made exclusively of stainless steel. The
nozzles are constructed with a centrally located hole surrounded by
slots. This design generates a concentrated air stream while, at the
same time, limiting both the sound level and air consumption to a
minimum. The small dimensions of the Microseries allow these nozzles
to be incorporated into virtually any machine design. The
Microseries fully complies with the stipulations of the EU Machine
Directive regarding airborne noise in machines. Patented. |
|
| Replaces open pipe: |
ø2,5mm |
(3/32") |
|
| Air consumption: |
10Nm³/h |
(5.9scfm) |
|
| Sound level: |
79dB(A) |
|
| Blowing force: |
1.8N |
(6.3oz) |
|
| Max temp.: |
400ºC |
(752ºF) |
|
| Weight: |
1.4g |
(0.003lbs) |
|
| Connection: |
M5x0.5 |
|
male |
| Nozzle material: |
Stainless steel |
|
| |
| |
| |
Supply pressure: 500 kPa ( 72 psi ),
measured just before the nozzle
Sound level is measured at
a distance of i m ( 39.37") from the nozzle,
with the
microphone held perpendicular to the direction of the air
stream |
| |
| Similar products:
MJ4,
MJ6
|
 |
View technical data-sheet in
pdf-format. | |
| | |
Air nozzles
